If you are running a workshop then you should definitely have a miter saw, its use and application are uncountable in workshops nowadays. It is used in almost all woodworking tasks from cutting hard timber to little designing on wood, it helps in everything. Its best feature is that it’s portable and can be transported to your desired location. It helps work faster in your workshop. Increase the works of man’s potential and ability. It works in a fine way as it’s designed to give the best outcomes.
Table of Contents
Best Miter Saw of 2023 Reviews and Complete Buyer’s Guide:
Miter Saw works with a round sharp blade that is mounted on an iron stand connected to the electrical motor. This blade is slowly touched to the wooden piece to cut it into smooth pieces. It works slowly and gradually. Its blade is strong enough to cut hardwood.
Blades of the saw can be moved in either direction from horizontal to vertical and vice versa. The type of saw matters a lot to get beveled cuts. You can find an enormous number of miter saw In the market due to their increasing demand in the woodworking industry. The following are the best miter saw of 2023.
Best Miter Saw of 2023 Comparison Table:
||Check On Amazon|
||Festool Kapex KS||
||Check On Amazon|
||Check On Amazon|
||Check On Amazon|
||Check On Amazon|
||Check On Amazon|
||Check On Amazon|
||Check On Amazon|
||Check On Amazon|
||Check On Amazon|
1.Dewalt DWS780 – Best Sliding Compound Miter Saw:
Its design shows that Dewalt manufactured this product with a lot of effort and professionalism. This is practical, reliable, and easy to handle just like the DWS718 miter saw. In fact Dewalt DWS780 is better than DWS718.
It occupies more space, it helps you do the job quickly and really fast. Dewalt has done a lot of improvements to its old version of the miter saw.
It has a power cord and dust tube which moves with dual slides and makes work fast and easy. The power cord is also modified it does not hang from the machine any longer. Previously it was really messy when the cord was hanging especially when difficult angles were required.
Dewalt has introduced a new XPS-led system in its miter saw. This is the most useful feature of the miter saw. Its led lights the blade from dual sides, it makes a shadow of the blade on the exact cutting side. Light also helps illuminate the blade.
With the help of LED now you will cut with surety and ambiguity will be minimum. You can judge the exact place to cut the wood. Led light is much better as compared to laser light because laser light has to be adjusted every time which is a bit difficult.
Decorative trimming has been made easier with this LED light, it provides precision. XPS-led system helps carve designs with more precision and perfection. Apart from precision it also adds beauty to the machine and makes the saw look more professional.
It comes with pre-aligned stops that are accurate. Do use a digital protector while working with the saw. It has a 16 amp power, 3900 rpm motor. It has a perfect dust collector system. It does not have a stand; its cross-cutability is 90 degrees. The cup capacity is 45 degrees.
2.Festool Kapex KS 120 – Best 10-inch Sliding Compound Miter Saw:
- It works with accuracy and precision.
- Its angle can be adjusted easily.
- It provides a perfect dust extraction tube.
These features are the core reason for its high price as compared to other miter saws.
It is very compact and composed. It has a robotic arm just like bosch gliding saw and delta Cruzer saw. It is easy our space in your workshop. to store, you can mount it with a wall which saves almost 2 to 3 feet of your workshop.
It has a rail at front i.e. forward design in kapix miter saw due to which it’s very compact. Its rails are in front of the saw and not at its backside. This helps to place it all easily and thus saves a lot of places which is a very useful feature while you are working in a home-based small woodshop.
Many miters saw have rails on both sides of miter saw, which covers a lot of space in the shop. Festool Kapex 120 saves space in your workshop. For users, easy Festool provided a rotary knob which helps micro-adjustments in the saw for bevel working. They have provided a very large bevel scale with an extremely precise scale. Which helps adjust bevel to make the perfect cut.
The saw is comprised of double-sided lasers. It helps make a precise cut by casting a shadow at the required angle. It has a well-designed dust tube which provides 91% dust extraction. It helps you work with comfort and precision. Only Kapex helps you work in such a clean dust-free environment. It has a 37 mm hose to dust cut hood.
It gives crown molding at 45 degree to 90-degree cut. At 6 to 7-inch depth. ¾ inch is its special cutting ability. Diameter of blade In saw is around 10 and a quarter inch.
3.Bosch GCM12SD Compound Miter Saw—Best Workshop Saw:
Bosch GCM12SD is something you are looking for to satisfy craving of your hobby or to finish your next wood project in a more precise and professional way. Its axial glide system makes it unique overall available miter saw. This system do not use a typical railing because other railing miter saw get really messy and gets chocked. They need to be cleaned properly every time before use. Rails are difficult to manage.
It has a robotic arm which helps glide the saw forward and backward when cutting the wood. Its cutting capacity is 14 inches. It gives a good compact cutting to wood plank. Its control is very firm and precise, it does not wobble when working thus preventing distractions. It is extremely versatile and can give unique cuts. It can be adjusted very easily to give bevel cuts. To fit rooftops.
It is compact and can fit in workshop easily. It has one-sided railing which makes it sit on wall and occupies less space. If you have built a workshop in your garage then this miter saw is your must buy.
Its assembly and alignment is very easy. It’s provided with a detailed manual for assembling it and even aligning it if any malfunction occurs.
It has a readily release square shape lock fence, it comes out of the box at 90 degrees from the saw table. Its do not requires any complicated adjustments.
It has easy lock and unlocks buttons, which helps fit the fence in perfect desired position. To align the saw perfectly according to your working demand.
Saw bears around 60 plus tooth. These tooth are bosh carbide which are very sharp and cuts quickly, smoothly and deeply.
Although its cutting is very precise and smooth but for gross cutting, it does not provide precise cutting like that for furniture’s or cabinets etc. if you are planning to something big then it will help for example deck building
This saw is durable and can long laster , as its blades are very strong and rigid they help give deep cuts. It works perfectly only on wooden planks and not on any metal.
4.Dewalt DHS790AT2 Compound Miter Saw – Best Jobsite Saw:
It is very useful for those who intend to use it in areas far from their work shops because it has wire and is also wireless. This is the best feature of Dewalt DHS790AT2. It can work on both batteries (2 x 60 V) and can also work via AC current I.e. directly connected via cable at 120 volts.
Its motor does not posses any brush which its a plus point, as it is laborious to clean brush and maintain it. Its motor lasts longer than brush motors.
Its fence is tall and can slide on the mount so you can adjust according to your requirement. These tall fence supports both crown molding and base moldings.
It Is incorporated with a new feature of the cut line blade feature. It helps blade cut where you intend to. It shows the width of the blade as well which helps you get an idea how the deep cut will be. It consists of 11 detents. These detents are located 60 and 50 degrees on left and right side of the miter.
It comes with a 60volts battery to charge the saw. Other than saw it can also charge your drills and other battery-operated tools that works at 20 volts. When this 60-volt battery is plugged into 20-volt device it changes to 20 volts and starts charging that device. It is a unique feature that may attract you while you intend to buy a miter saw.
This saw is mostly recommended for field areas as it has a unique feature of wireless battery. If you are searching for a saw to work in home, then this is not recommended to you at all. But if you are searching to get best quality and durability then I recommend you this mighty saw.
It attracts its customers because you do not need to worry about messy cables any main power source. You can use it anywhere you want with the help of 60 volts battery. I will recommend it to professionals, it will make their work easy and quick.
5.Delta 26-2240 10 inch – Dual Bevel Sliding Cruzer Miter Saw:
If you are a professional and searching for more advanced and robotic kind of saw then Delta 26—2240 is best for you. It has robotic arms that help you cut the wood smoothly and effortlessly. This saw is carefully designed by manufacturers to give best outcome and work for longer period of time. It is durable and strong.
It is made up of high-quality aluminum often referred as military-grade aluminum. It gives it greater strength so it can cut more strong card wood. It bearings are strong and heave. All these features help glide through cuts easily.
Pressure of the robotic arm can also be adjusted depending upon the type of cut you want to make. With the help of this saw now you can make cross-cutting of almost width of 16 inches in width and crown molding around 6inches in width.
Bevel of this saw is two-sided which makes it dual. It bevels almost 45 degree to left and right. It miters around 50 degrees to the left and around 60 degrees to right. It detents at 10 meters to helps in difficult cuts.
Miter scale is easy to read that’s why all adjustment can be done easily. It has a full size of the trigger and its handle is molded which makes it very easy for the user to operate and work efficiently and comfortably.
6.Metabo HPT 12 inch – Sliding Compound Miter Saw:
It is the best 12 inch of miter saw that you can find in market. It was known as Hitachi previously but now it’s called Metabo HPT 12 inch Sliding Compound Miter Saw. It is best among all saws that you need. It makes efficient and accurate cuts. It glides over the cuts to give smooth finishing as you want.
It has a large fence which can slide on the table and work perfectly. It helps get good cuts easily. It gives large cuts almost 7 and half inches vertically. It makes miter cuts at 44 and 57 degree right and left. While using this saw I did my projects in days and all of them turned out to be very successful.
It is compact and composed saw. It doesn’t have rails like a traditional saw in fact it has bladed on the sides which saves place when you keep it in your shop.
It has a powerful motor of 15 ampere. It is powerful enough to do all the cutting work at once. It is easy to operate and its handle is designed in such a way that it is even more easy to hold. Does not slip nor vibrate.
Basic features are following:
- Compact slide system.
- Laser maker system.
- Large sliding fence
- 0 to 57 degree of miter.
Metabo HPT is the best saw for professionals. You cannot get one better than this one.
7.Makita LS1018 – Dual Bevel Sliding Compound Miter Saw:
If you are searching for something perfect than here is Makita LS1018 Dual Bevel Sliding Compound Miter saw. It is loaded with unique and useful features. If you have used Makita LS1013 then you will definitely buy this newer version. As this product satisfy its customer in all possible ways.
Makita has updated its saw keeping in view its competitors who are upgrading their saw. LS1018 is a very high quality saw ensuring precision and quality.
If you compare it with LS1013, this is a much lighter saw which makes it advisable for hobbyist and for Jobsite. It can be transported easily from one place to another. This saw is easy to operate as its handles are soft, large and round. It is around 50 pound.
Its drive motor has 4300 rpm speed which works on 13-ampere power. It cuts through wood just like a knife cutting soft cheese. Its maintenance cost is very low, it rarely gives any mechanical problem but if it does can be corrected easily.
Table and lock system of Makita LS1018 works exceptionally with perfection. You just need to adjust its working angle and switch on the knob. Lock attached to spring will set it to its rightful place. Its fixes properly in its place and do not get lose when vibrates due to pressure. It can work on hard wooden surfaces and gives smooth even cuts. If you are not a professional still you can use this saw easily as it comes with a manual which describes its all notches and details. It is easy to assemble.
It adjusts its torque automatically to overcome cutting resistance it faces. So if the cutting material is hard saw will adjust automatically and will give bigger torque. It gives torque to overcome the resistance and work perfectly with any material.
Another unique feature of this saw is it has a silencer in it which helps control the noise and it works without any loud sound. Makita has a gearbox in it which reduces loud sounds.
8.Dewalt DW715 – Single Bevel Compound Miter Saw – Chop Saw:
This is the best saw available in market right now. It is very durable, rugged and the material with which it is made has very long shell life. It has a carbide blade; it is run by a powerful 4000 rpm. Due to this immense power it cuts strong wood and works smooth.
Its blades are of carbide and are 12 inches. It has strong motor as discussed earlier. Its bevel ability is from 0 degree to 48 degree left and right.
9.Hitachi C10FCH2 10 inch – Single Bevel Miter Saw:
Its quality and performance is excellent but good news for you its price is not as high as its quality. So it is highly recommended for low budget customer to buy C10FCH2. It is equipped with led laser which helps locate site of cut at the wood.
In fence is sliding and long which slides over the wood smoothly making it possible to do work with precision and detail. Every saw have anyone important feature which makes it attractive for buyer. But C10FCH2 have all of them at such low price.
Laser is very helpful for new workers or the hobbyist who need pattern to work. It casts a shadow of blade on areas where saw has to put cut. It has a strong machinery with robust motor that can cut rock hardwood.
It is not the only big miter saw but it runs with a very powerful motor at 15 ampere. It runs at speed of 5000 rpm which helps give perfect cut. Its motor is durable and easy to maintain. It does not have brushes that need to be cleaned and maintained over n over again.
10.Makita LS1040 – Single Bevel Compound Miter Saw:
They are famous because of their beautiful design. One of the most unique features is its direct driven motor that helps it work much better than other saw. They are better than belt motors because belts slip and machine malfunctions.
These motors are energy safer and work longer. Motor is powered with 15 amp motor and blade spins at rate of 4000 rpm. It has a dual pivot.
It is recommended for new workers. Professional might find it simple. But its features are really unique and good.
Before you intent to buy best miter saw go through this buying guide which will help you a lot.
You should have basic knowledge about miter saw to one best for you, following are its types:
- Sliding compound miter saw.
- Non- sliding miter saw.
- Single bevel miter saw.
- Double bevel miter saw.
Now coming towards the features you should know before buying a miter saw:
Without precision miter saw is useless, so it is a very important feature you should look for. Either you are a professional or a simple hobbyist precision should be your prime feature while searching saw for you.
Another important feature. Choose saw which requires less power to start working and cut required wooden item. If you need to apply more power than it’s not a good one. Power is also important because it is responsible to run the blade, more powerful motor will give stronger rotation to the blade.
Before buying the miter saw you must check the size of the blades or capacity of the compound miter saw. The vertical capacity will determine how deep you can cut any cardboard, wood or any other material and horizontal capacity will determine how wide you can cut.
This is another important parameter to be kept in consideration.
Mobile saw can help you work in field. So if you don’t want fieldwork then you can ignore this factor.
What is the most accurate Miter Saw?
Here are the TOP 5 most accurate miter saws:
- Dewalt DWS780 12 inch Double Bevel Sliding compound miter saw.
- Festool Kapex KS 120 Sliding Compound Miter Saw – Best 10 inch Miter Saw.
- Bosch GCM12SD Double Bevel Gliding Compound Miter Saw—Best Workshop Saw.
- Dewalt DHS790AT2 Flexvolt Compound Miter Saw – Best Jobsite Saw.
- Delta 26-2240 10 inch Dual Bevel Sliding Cruzer Miter Saw.
What is the Best Mitre Saw for Home Use?
Festool Kapex KS 120 is the Best Miter Saw for Hom Use. It is very compact and composed. It has a robotic arm just like bosch gliding saw and delta cruzer saw.
Is a sliding miter saw worth it?
If you are planning to buy sliding miter saw and you have knowledge of it then definitely it will be worth buying. If you didn’t about how it works so, it is not necessary buying sliding miter saw.
Is Festool worth the money?
Festool is one of the best company that manufactures miter saws. For users, easy Festool provided a rotary knob which helps micro-adjustments in the saw for bevel working. They have provided a very large bevel scale with an extremely precise scale. Which helps adjust bevel to make perfect cut.
Hopefully, this article will be useful to you while buying a miter saw. You can buy one that fits for you and this article will definitely help you judge what you need. Go buy one immediately.